|
|
We appreciate your help
in keeping this site going.
|
|
05-17-2011, 11:44 AM
|
|
Senior Member
|
|
Join Date: Aug 2010
Location: Metro Detroit
Posts: 13,016
|
|
$50 a bulb??
So, no incandescent bulbs can be sold in the 100 watt and above range starting next year. The replacements? LED bulbs at a cost of $50 each!
http://news.yahoo.com/s/ap/20110516/...9saXN0BHNsawNs
Talk about an government policy that pursues achieves its goals on the backs of the little guy, working family, poor, whatever...!
|
05-17-2011, 11:49 AM
|
Abby Normal
|
|
Join Date: May 2009
Posts: 11,245
|
|
Quote:
Originally Posted by whell
Talk about an government policy that pursues achieves its goals on the backs of the little guy, working family, poor, whatever...!
|
not really, it simply causes us to value lighting more than we had previous
|
05-17-2011, 01:10 PM
|
|
Reformed Know-Nothing
|
|
Join Date: Oct 2009
Location: MoCo, MD
Posts: 25,914
|
|
We still have compact fluorescents. As for the LED bulbs, they too will be down to a couple of bucks in the future (this coming from a guy who spent $3,500 on a Pentium 133 computer with a 1.6 GB hard drive).
There will be a learning curve as well as the need for economies of scale to kick in. It does make sense, however, that Republicans seem wedded to the a technology that is 130 years old.
__________________
As long as the roots are not severed, all will be well in the garden.
|
05-17-2011, 01:20 PM
|
|
Senior Member
|
|
Join Date: Apr 2011
Location: Nashville, Tennessee
Posts: 1,145
|
|
Actually LED lighting is one of our current projects with a client. That's what I SHOULD be doing right now instead of reading this board.
Here's the deal. CF bulbs suck. LED bulbs will EVENTUALLY win out. The problem is the type of wiring we have in our homes. BOTH technologies would benefit from DC distribution of power internal to the house. Trying to power a 6 or 10 Volt string of LEDs from AC line mains means that you have to have a "complicated" switching power supply in EVERY bulb! Clearly, a better scheme would be to centralize the AC/DC conversion and make simpler "bulbs" which have only the basic LEDs. Also would help to have DC wiring to incorporate power gained thru local wind/solar generation..
|
05-17-2011, 01:36 PM
|
|
Area Man
|
|
Join Date: Oct 2009
Location: The Swamp
Posts: 27,407
|
|
The first time I ever saw a CF bulb, it cost something like $15 per bulb.
And I don't understand why so many people hate them. My house is full of them now that they are cheaper. One outside has been burning 24/7 for three years now.
So what's the big deal?
Dave
__________________
"When the lie is so big and the fog so thick, the Republican trick can play out again....."-------Frank Zappa
|
05-17-2011, 02:05 PM
|
|
Senior Member
|
|
Join Date: Feb 2011
Location: San Diego California
Posts: 3,261
|
|
Quote:
Originally Posted by BlueStreak
The first time I ever saw a CF bulb, it cost something like $15 per bulb.
And I don't understand why so many people hate them. My house is full of them now that they are cheaper. One outside has been burning 24/7 for three years now.
So what's the big deal?
Dave
|
Ugly cold blue cast light. They have become much better than they once were. I hate tube lighting in stores because I'm sensitive to the 60Hz cycle rate. It is bad enough that I routinely leave the store if they have unfiltered fluorescent tubes. The CFLs are much better. I like Verilux full spectrum work or task lights, but much prefer incandescents for ambiance lighting.
Government regulation here is just another symptom of our overbearing goveernment. I'd much rather deal with the increased polution of a coal plant than the chemicals used in widespread CFL and LED light manufacture.
__________________
Dear Optimist: Unless life gives you water and sugar too, your lemonade will suck.
|
05-17-2011, 02:23 PM
|
|
Area Man
|
|
Join Date: Oct 2009
Location: The Swamp
Posts: 27,407
|
|
So, really, it's a matter of personal preference. I have no problem with them. I've always regarded LEDs as having the weird bluish light.
I think people may even have a bigger issue with LEDs, if they must change the wiring in their homes to accommodate them. Although, that shouldn't be all that hard. Except when it comes to AC-120v driven appliances. Then what? An inverter at every standard appliance?
Dave
__________________
"When the lie is so big and the fog so thick, the Republican trick can play out again....."-------Frank Zappa
|
05-17-2011, 02:58 PM
|
Senior Member
|
|
Join Date: Sep 2010
Posts: 217
|
|
I wonder why the gov't didn't get serious about CAFE standards instead? How many MPGs better would the fleet have to achieve to equal the energy savings from these bulbs?
|
05-17-2011, 03:22 PM
|
|
Possibly admin. Maybe ;)
|
|
Join Date: Sep 2009
Location: Land of the burning river
Posts: 21,098
|
|
Perhaps a dual power system, ac from the street, a main converter for the lighting? AC travels better. Or perhaps a central light source with fiberoptics? I've heard of a 'light engine' before.
Also, AC is self cleaning, DC corrodes over time at the contacts - ask a tube guy Heck or a car guy So there'd have to be accomodation for that.
I'm waiting for the price to go down on LED floods, I've got 10 recessed light fixtures awaiting. But for $1100 I'm still waiting
Pete
__________________
“How many legs does a dog have if you call the tail a leg? Four. Calling a tail a leg doesn't make it a leg.”
|
05-17-2011, 03:26 PM
|
|
Resident octogenarian
|
|
Join Date: May 2009
Location: Maryland
Posts: 20,860
|
|
Everytime I am in Home Depot I stock up on incandescents, mainly Sylvania because they are still made here. CFLs bother my wife's eyes and since they are all made in China you know where you can stick them. LEDs won't be any better unless the rectify the AC and stop the 60 Hz blink. I wonder if they stop to think about people with epilepsy?
__________________
Great minds discuss ideas; Average minds discuss events; Small minds discuss people.
Eleanor Roosevelt
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:48 PM.
|